We offer a wide range of accessories for our products, including storage systems, optical products, patch panels, grounding kits, modular bases, castors and feet, installation and connection kits and cabinet paneling.
The racks are designed as a closed cabinets. To enable access to the installed equipment, the racks are fitted with doors, rear or side panels. Customers can choose from as many as 15 types of paneling.
The racks are designed as a closed cabinets. To enable access to the installed equipment, the racks are fitted with doors, rear or side panels. Customers can choose from as many as 15 types of paneling.
The Premium series cabinets were designed as a flexible solution, enabling variability and exchangeability of all parts of the cabinet casings, including the top and bottom cover.
A unique combination of 19" rails with many advantages.
Fixed shelves are the basic option for equipment that is not fitted with 19" mounts. The shelves are perforated over their entire surface for effective air flow.
Fixed shelves are the basic option for equipment that is not fitted with 19" mounts. The shelves are perforated over their entire surface for effective air flow.
Fixed shelves are the basic option for equipment that is not fitted with 19" mounts. The shelves are perforated over their entire surface for effective air flow.
Pull-out shelves can hold equipment without 19" mounts. The pull-out system makes the equipment easily accessible. The shelves are perforated over their entire surface for effective air flow.
Pull-out shelves can hold equipment without 19" mounts. The pull-out system makes the equipment easily accessible. The shelves are perforated over their entire surface for effective air flow.
Load supports are used to stabilize equipment in PREMIUM, OPTIMAL and iSEVEN series rack cabinets.
Patch panels are attached to 19" vertical rails and allow the termination of data or telephone cables to different types of modules.
All CONTEG cabinets include a basic grounding kit in the standard configuration.
All cabinet doors are fitted with a locking mechanism. This ensures protection against unauthorized access to the installed equipment.
Plinths are used as an aesthetic and stabilizing element of rack cabinets. This is an alternative to the standard height-adjustable legs or optional castors.
All CONTEG cabinets include a basic grounding kit in the standard configuration.
Load supports are used to stabilize equipment in PREMIUM, OPTIMAL and iSEVEN series rack cabinets.
In the standard configuration, CONTEG rack cabinets are supplied with height-adjustable feet. Optionally, the feet can be replaced with castors or plinths.
The mounting kit is used to attach 19" technology to vertical rails with this spacing.
Linings for sharp edges of cable inlets. Anti-dust plugs significantly reduce the amount of dust entering the cabinet.
The lighting unit with a motion sensor is equipped with a magnet and can therefore be easily placed anywhere in the cabinet.
Patch panels are attached to 19" vertical rails and allow the termination of data or telephone cables to different types of modules.
Eccentric rails can be installed in RDF and RSF cabinets (800 mm wide only) with U-bars for 42U and 45U cabinets.
Connection sets are used to connect rack cabinets of the same height and depth into one row
Holders are intended for holding a keyboard or monitor. A drawer is designed to store drawings, technical documentation, etc. directly in the cabinet.
Optical trays are used to terminate optical cables in the cabinet. We also offer various types of modular panels and other optical accessories.
All CONTEG cabinets include a basic grounding kit in the standard configuration.
